In order to maintain optimum performance, ink is routinely flushed through the print heads to ensure the nozzles remain clear. The Maintenance Box is used to collect and store ink that is flushed through the print head during maintenance cycles. The Maintenance Box is compatible with Epson F570 and F570 Pro printers.

This Maintenance Box is also compatible with the following Epson printers:

• SureColor T5170M and SureColor T5170
• SureColor T3170M, SureColor T3170x, and SureColor T3170
• SureColor T2170

1. Notice the alert Maintenance Box replacement on the front panel of the printer. Replacement instructions are also provided on the front panel.
2. Prepare the new maintenance box (this product) and attached bag (also included) for replacement.
3. Open the Maintenance Box cover on the back side of the printer gain access to the Maintenance Box for removal.
4. Before removal, note the orientation of the Maintenance Box as it's installed in the printer.
5. Pull the Maintenance Box to remove it from the printer.
   
6. Place the old Maintenance Box in the bag and seal for disposal.
   
7. Insert the new Maintenance Box, aligning the lip on the Maintenance box with the rail on the printer. Press until it's fully seated in the printer.
   
8. Close the Maintenance Box cover to complete the replacement process.
   
9. Dispose of the old Maintenance Box per federal, state, or local instruction.

If you have any questions don't hesitate to contact us at: drivenbygraphics@gmail.com

DISCLAIMER: This is not a Seiko Epson Corporation or Epson America, Inc. product. Driven By Graphics is not affiliated with, nor endorsed by Seiko Epson Corporation or Epson America, Inc. All trademarks, trade names, logos and model numbers mentioned or used are the property of their respective owners. The mention of trademarks, tradenames, logos and model numbers is solely for the purposes of describing this product’s compatibility.