Custom Printed HTV Transfers

*** UPDATE ***
As of 4/23/2020 minimum orders of 6 or more of a single design is required. This product listing will no longer be used to make direct purchases, but rather to get a cost estimate for your order. After review, an emailed response with cost estimate will be provided.

This is a service offering for full-color, printed Heat Transfer Vinyl (HTV) transfers.

Printed HTV is a commonly used decoration method for a variety of garment types. These transfers are printed with ecosolvent inks and are a very cost effective solution for full-color decoration in medium to low quantity runs. The transfers are easy to use and come ready-to-press!

The transfer material has been lab certified to withstand 50 wash and dry cycles without cracking, peeling or fading and is also CPSIA certified making it safe for children’s clothing.

*** IMPORTANT: PLEASE READ ***
>>> This print service is dependent upon the design file(s) that you provide for production. Printed HTV transfers are typically a combination, print AND cut process. The printed graphic alone is typically fairly easy and straightforward. However, separate CUT LINES are also required for production. If you are not familiar, the creation of cut lines is not trivial process and can take a considerable amount of time. If your file is not production ready and requires cut-line creation, an additional $5 fee will be added to compensate for the time required to do so. Please choose the appropriate option.

>>> The quality of printed graphic is dependent on the quality of the graphic provided. Ideally, uploaded files shall be vector-based or appropriately sized PNG/JPG with a minimum of 300dpi. If the graphics are not sufficient to meet your order requirements, your order may be cancelled.

If you have any questions or would like your graphics reviewed before submitting your order, feel free to reach out directly via email to: drivenbygraphics@gmail.com

Printed HTV Material / Fabric Compatibility

• 100% Cotton
• 100% Polyester
• 100% Preshrunk Cotton
• Cotton/Poly Blends
• Lycra®/Spandex Blends

Press Instructions

1. Pre-press garment at 300ºF for 10-seconds.
2. Remove backing paper from provided transfer.
3. Position transfer on garment and cover with Teflon sheet.
4. Press at 300ºF for 15-20 seconds.
5. Remove Teflon cover sheet. Wait 5-seconds, then peel away the carrier sheet.

Garment Care Instructions

For best results, turn garment inside out. Machine wash warm or cold using mild detergent. Do not bleach. Do not iron directly on transfer. Tumble dry low setting. Do not dry clean.